paper cutz: April 2012

Today the design team used any Disney cartridge

Here’s what I came up with my son is going to a birthday party this weekend so a made this for him to take.

i made an explosion box!

The box its self is made from three sheets of 12x 12 papers.

The red layer is 12x12 scored at 4 inches on all side.

The green layer is 11 ¾ x 11 ¾ scored at 4 inches on all side.

The yellow is 11 ½ x 11 ½ scored at 4 inches on all side.

The lid is 7 1/8 x 7 1/8 scored at 1 ½ on all side.

All the characters where cut at 4.00 inches

The 6 was cut a 2 inches, on the candle I used some yellow stickles.

To make the cake I used my nestabilities

I use three sizes the starting with the second from the middle.

Then cut strips ½ inch wide formed a circle and glued it to the circle

Then used some ribbon around the strips.

The mats under the cake I cut the blue one at 3 ½ and the red one at 3

The happy birthday is cut from sweet treats at 2 inches.

For the ears on the lid I also used my circle nestabilitiescut the out two

And layered them together for some stability then hot glued them on

To hide the glue I used a black maker and colored it.

The ovals are also a nestabilties the third from the middle.

Thank you for coming

Welcome to My Cricut Craft Room's

100 Cricut Cartridge Blog Hop

You should have started at http://mycricutcraftroom.blogspot.com/ if not please start at the beginning

Be sure to visit Erica's Blog http://mycricutcraftroom.blogspot.com tomorrow for over 50 NEW projects that you did not see today....

Also make sure to follow Erica's blog so you will know when she has contests, prizes, challenges, swaps & special online coupons.

Currently she is running a Scrapbook & Card challenge over on her challenge blog and you can win a gift certificate to her web store! http://ericascraftroomchallenges.blogspot.com/

Don't forget to comment along the way on all of the blogs today and tomorrow to be entered to win the Cricut cartridge that Erica is giving away today.

Winners will be announced on her blog on Tuesday!

I have made this desk calendar the lid come off to store the other months of the year.... I used the Cricut cartridge Art nouveau and elegant edges for my cuts...

I cut this at " 4 ½ and cut four of the

Then layer all four using the layer with the holes for the top on the top layer you want to make a hole in the middle to place your skewer then cut four more for the bottom using the shadow feature on elegant edges

Then cut a strip 2 ½ inch wide by 6 inch for the both. For the top 1 ½ inches wide by 5 ½ making them in a circle to fit on inside each other and fitting on the base and top from the step before. Them cut 4- 1 inch strips making an x making an x with 2 of them for the top and 2 for the bottom.

The bird I cut it at 4 ½ inches from the art nouveau cartridge cutting all the layers at 4 ½ inches cutting it once then flipping it then cutting it out again with all the layers the wings I put on pop dots on both sides, between the layers of the circle I glued in a skewer leaving a bit out the end to hot glue in the hole of the lid I also inked the edges of the circle.

The calendar I printed it from a calendar I had on my computer I printed it out on card stock then cut it in to squares then cut another piece of card stock just a little bigger than the calendar piece on two of the corners I made I spilt to slide the corner of the calendar piece into